Thermal PrintHead Cleaning Swabs

$22.00
Current Stock:
SKU:
tswab154
Phone:
1 (800) 434-9011
Condition:
New
Availability:
in stock

Our Thermal Printer Printhead Cleaning swabs are a single-use, non-abrasive cleaning product. The 4.5" long cleaning swab has a foam tip that is only 0.591" wide. The cleaning swab is designed to reach into narrow spaces. Our thermal cleaning swab will extend the life of your print head, reduce wear on the platen rollers and may prevent wrinkling and tearing of your thermal ribbons.

All of our products use an Electronic Grade IPA Solution of 99.9% Isopropyl Alcohol. Many of our competitors products us rubbing alcohol at 70%. A higher percentage of Isopropyl Alcohol reduces the drying time of your print head and platen roller. Packaging: 25 per box.

Questions? Call Us at: 1-800-434-9011

Thermal Printer Print Cleaning Swabs

  • We offer a full line of thermal printer services and products, including Print Heads, Wax Ribbons, and Labels.
  • Our cleaning swabs are a single-use cleaning solution for your thermal print head.
    • The thermal cleaning swab contains 1.5 ml of our IPA cleaning solution.
    • The foam tip is made from Urethane.
    • The 0.591" wide foam tip can reach narrow spaces.
    • The IPA cleaning solution is cover with an easy snap seal. Pressing the body activates the seal.
    • The low cost of the thermal cleaning swabs makes it practical to place at multiple printing stations
  • Thermal print head cleaning Swabs are a  non-abrasive cleaning method.
    • The foam tip of thermal cleaning swab is a soft felt like material made of Urethane
    • Thermal printer cleaning cards are made of a coarser material and are not meant for frequent use.
  • Thermal print head cleaning swabs specifications
    • IPA Volume: 1.5 ml
    • Solution Content: 99.9 IP
    • Foam Tip Urethane
    • Handle Material Polypropylene
    • Handle Dimensions (LxD) 4.5" x 0.200"
    • Foam Tim Dimensions (LxD) 0.984" x 0.591".
    • 100 ppi , open cell polyurethane rectangular foam tip.
    • 25 swabs to a box
  • Regular cleaning of thermal printer areas can extend the print head life by 80%.
  • The Thermal printhead cleaning swab uses an Electronic Grade IPA Solution of 99.9% (Isopropyl Alcohol) this is nearly 30% stronger than off the shelf sterile alcohol.
  • Residue leftover from slower drying cleaning solutions can cause the breakdown of the backing of thermal ribbons. When the backing material breaks down it can cause contamination of the print head and platen rollers.
  • Leftover adhesive and burned on debris may cause the wrinkling and tearing of thermal ribbons and labels.
  • All thermal printer manufactures recommend using thermal cleaning products during every change of media.