Country of Origin: Made in USA.
Cost: $14.65 per roll. 24 Rolls to a case.
Printhead: Protective Backcoating & Anti-static.
Where Quality Meets Value. This Wax Resin Formula is Designed to Out Perform Premium Formulas without Premium Pricing. Our Formula Targets 3 Critical Areas of Ribbon Performance: Abrasion Resistance, Darkness of Print (Bar Code Readability) and Scanability. Please Review our Test Results. Formula Comparison.
LabelStock (a.k.a Substrate):
Coated Paper, Uncoated Paper, Uncoated Tag, Coated Tag, Coated Face Sheets, Uncoated Face Sheets, flood-coated, Gloss Sheets, Polypropylene, Vinyl (Topcoat), Polyethylene, Polyolefin, Tyvek, Tyvek Brillion, Valeron, Kimdura, Polyart, Synthetic Paper, UV Varnished Labels
This Premium Wax Resin ribbon is coated side in (a.k.a ink on the outside). Inner diameter (core size) of this ribbon is 1” (25.4mm). These ribbons can reach print speeds of up to 8 IPS (inches per second) and have an ink transfer temperature of 87°C (188°F).
We are so Confident in This Ribbon Formula, We will Provide a Free Ribbon Sample. Test Your Label Stock and Printer. Remove all Doubts. Call Us at: 1-800-434-9011
Part Number Compatibility: 18104339, FST07608, S076410231WR, GanMP05 & SAT15S-076410
Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.
- The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the inner side of the ribbon. The shiny side is out and duller side faces in.
- Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
- Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
- Our General Use Wax Resin ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
- Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
- Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.
Formula Compatibility: MPMid, TRX-55, Zebra 5586, Zebra 3200, B120, B128/M95, M95, PM350A, Prime Mark, R2 Prime, TDM231, APH FH, APX FH+, HR-12, DC200, Net Mark IQ, PM255, TDM231, US150, Z201, Z203
Printer Models Certified for This Wax Resin Ribbon:
Sato: 11F/2700, 11F/4011, CL408E, CL408e-RFID, CL412e, CL412e-RFID, CL608e, CL612e, GL408e, GL412e, GT408e, GT412e, GT424e, LM408e, LM412e, LT408, M10e, M2312, M2322, M2700, M3200, M3400, M4011, M4500, M4505, M4524, M4525, M4526, M4600, M4628, M4636, M4638, M4648, M4760, M4900, M4925, M5500, M7740, M8400, M8400RV, M8400Rve, M8400S, M8450, M8480S, M84Pro(2), M84Pro(3), M84Pro(6), MR4206, M8485S, M8485Se, M8490, M8490S, M8490Se, MI-4208, MI-4308, S84 Series, S8408, S8412, S8424, XL400, XL410And Many More! Questions? Your Printer not Listed? Call 1-800-434-9011
