Country of Origin: Made in USA. Ribbon Required. Cost: $2.99 per 1,000 Labels. 5,500 labels a roll. $16.43 per roll, 6 rolls in a case. 33,000 labels to a case.
Our Quality Difference Our Acrylic, All Temperature Adhesive will Stop Your Labels from Balling up when Cold and will Stop your Labels from Falling off in Heat. This label can be applied at temperatures as low as -20°F and will maintain its adhesion strength in temperatures ranging from -65°F to 200°F.
Our Top Coat, Matte Finish contains a Protective Film Designed to Resist Condensation, UV Light, Heat and Chemicals when used with a Ribbon.
The label’s coated surface is Bright White Paper with a Matte finish. We believe this finish (between high gloss and dull) is ideal for bar code printing. The Adhesive is Permanent upon Application.
Inner diameter (core size) of the label’s roll is 3” (76.2mm). There are perforations between each label. The labels are separated by 1/8" gap between labels. This label’s shape is rectangle and the corners are rounded. Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label).
This Label is compatible with the following Part Numbers: 620-STT-3-1P, CTT300100-3P, 10000287, TOP300100P1P38G, STT-3-1P, L-TT-30101P, S-5951, RL929, RTT3010AP, 10010043, 1691923, LD31TT3P6
We are so confident in this label, We will provide a Free Label Sample. Remove all doubts, test your ribbon and printer against this label.
Questions? Concerns? Call Us at: 1-800-434-9011.
Our Commitment To Quality
The Liner Our foundation is built upon a 40lb supercalendered bleached Kraft release liner. Our liner is designed for roll to roll applications with enhanced die cutting and stripping properties.
A supercalender liner is created by putting the liner material under intense pressure. The compressed liner material forms a silicon like surface. This silicon like surface provides for a quick and even release of the adhesive from the liner.
Our label incorporates a 40 lb face stock specifically designed for thermal transfer barcode printing. We designed our facestock to meet scanning requirements of 87% for brightness and 80% for opacity.
We chose the Matte finish (coating on the facestock) as the perfect balance between ink absorption and abrasion resistance. The Matte Coating contains a Protective Film that resists UV Light, Heat & Chemicals.
If you have questions or are looking for custom labels call us toll free at: 1-800-434-9011.