Wax Resin Ribbon: 1.18” x 2,952’ (30.0mm x 900m), Ink on Inside, General Use, Near Edge, $8.50 per Roll in 12 Roll Case

Current Stock:
1 (800) 434-9011
In stock

Country of Origin: Made in USA. 
Cost: $8.50 per roll. 12 Rolls to a case. 
Printhead: Protective Backcoating & Anti-static.

Polypropylene, Nylon, Polyethylene, Polyolefin & Polyester

These Near Edge, High Speed, Wax Resin ribbons are coated side in (C.S.I.) / ink on the inside. Inner diameter (core size) of this ribbon is 1” (25.4mm). These ribbons are designed for high speed print up to 26 IPS (inches per second) and with an extreme darkness needed for printing on flexible packages. These ribbons are among the darkest print, near edge ribbons in the industry. Imagine, this speed and darkness of print with an ink transfer temperature of only 82°C (179°F).

We are so Confident in This Ribbon Formula, We will Provide a Free Ribbon SampleTest Your Substrate and Printer. Remove all Doubts. Call Us at: 1-800-434-9011  

Part Number Compatibility: 18107627, 18107662, 211MSD030900, 18106048, 18106439, FMA025NFL, FMA030F9, FMA030QX & P110030ZIP

Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.

  • The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the inner side of the ribbon. The shiny side is out and duller side faces in.
  • Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
  • Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
  • Our General Use Wax Resin ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
  • Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
  • Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.

Formula Compatibility: M295 Plus, M295, APR 600, APX 650, HF12, HF18, HT8Plus, NET Flex, Net Flex+, P110, B130EV, EM211, US770 & Z213

Printer Models Certified for This Wax Resin Ribbon:

Markem:  SmartDate 5, SmartDate 5 Coder, SmartDate 5 128, SmartDate X40, SmartDate X60 & SmartDate X60 128

Questions? Your Printer not Listed? Call 1-800-434-9011