Country of Origin: Made in USA. Ribbon Required.
Cost: $13.99 per 1,000 Labels. 1,000 labels a roll. 4 rolls in a case. 4,000 labels to a case.
Our General Use, Rubber Based Adhesive instantly bonds with corrugated boxes, shipping and logistics labels providing excellent adhesion on non-smooth surfaces. This label can be applied at temperatures as low as 40°F and will maintain its adhesion strength in temperatures ranging from -20°F to 140°F.
Rubber Adhesives struggle with temperature extremes (Hot and Cold), chemicals, UV Light and outdoor living. Our Top Coat, Matte Finish contains a Protective Film Designed to Resist Condensation, UV Light, Heat and Chemicals when used with a Ribbon. If your label needs to Survive where Rubber Adhesives Struggle, Please Review our Premium Label.
The label’s Coated surface is Bright White, Paper with a Non-Glossy appearance. The Adhesive is Permanent upon Application. Inner diameter (core size) of the label’s roll is 3” (76.2mm). There are perforations between each label. The labels are separated by 1/8" gap between labels. This label’s shape is rectangle and the corners are rounded. Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label).
This Label is compatible with the following Part Numbers: 70P*BTM4060AP, T0P400600P1P38F, CTT400600-3P, 10005853, 10000281, 620-STT-4-6, 72353, L-VT-40601, L-VT-40301P, TOP400600N1N38F, L-TT-40601, STT-4-6, S-7413, RTT4060A, 620-STT-4-6P, 72294, 10018340, L-VT-40601P, TOP400600P1P38F, STT-4-6P, L-TT-40601P, S-5037, RL786, RTT4060AP, 1058450, LD46TT3P6 & L‐ S-5037
We are so confident in this label, We will provide a Free Label Sample. Remove all doubts, test your ribbon and printer against this label.
Questions? Concerns? Call Us at: 1-800-434-9011.
Our Commitment To Quality
- Our labels are certified ISO 9001 for Quality Management and ISO 14001 for Environmental Management.
- To extend the life of the label face we use a 46 lb face stock
- To insure read and scanning quality the face stock has an 89% brightness and an 87% opacity
- We use a face stock with a tensile strength of 26 lbf/in to resist abrasions.
- We have labels that are UL-certified, GHS compliant.
- Uses: Prescription, Shipping, Manufacturing, Inventory, Jewelry, Asset, Tag & Cable Labels
- Industries: Healthcare, Manufacturing, Retail & Transportation
- Custom labels can be produced on a wide variety of material, with custom colors, sizes and shapes.
- If you have questions or are looking for custom labels call us toll free at: 1-800-434-9011.
