Country of Origin: Made in USA.
Cost: $59.90 per roll. 24 Rolls to a case.
Printhead: Protective Backcoating & Anti-static.
LabelStock (a.k.a Substrate):
Vinyl (Topcoat), Polyesters (Gloss Topcoat), Polyesters (Matte Topcoat), Polymide, Polyethylene, Polyolefin
This General Use, White Resin ribbon is coated side in (a.k.a ink on the inside). Inner diameter (core size) of this ribbon is 1” (25.4mm). These ribbons can reach print speeds of up to 8 IPS (inches per second) and have an ink transfer temperature of 199°C (390°F).
We are so Confident in This Ribbon Formula, We will Provide a Free Ribbon Sample. Test Your Label Stock, Tags and Printer. Remove all Doubts. Call Us at: 1-800-434-9011
Part Number Compatibility: 18106140, WHSA102410 & FST1023W1
Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.
- The duller side of the ribbon is the ink coated & side. This ribbon’s ink is on the inner side of the ribbon. The shiny side is on the outside and duller side faces in.
- Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
- Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
- Our General Use Resin ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
- Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
- Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.
Formula Compatibility: 6200 - White Zebra Resin, R510W – White Durable Resin, R510C – Durable White Resin, AXR 600W White Resin & DC300 – White Resin
If You do not See Your Printer Model, Ribbon Size or Ribbon Color, Call Us. We can Match You with the Correct Ribbon 1-800-434-9011.
Printer Models Certified for This Resin Ribbon:
Sato: 11F/2700, 11F/4011, CL408E, CL408e-RFID, CL412e, CL412e-RFID, CL608e, CL612e, GL408e, GL412e, GT408e, GT412e, GT424e, LM408e, LM412e, LT408, M10e, M2312, M2322, M2700, M3200, M3400, M4011, M4500, M4505, M4524, M4525, M4526, M4600, M4628, M4636, M4638, M4648, M4760, M4900, M4925, M5500, M7740, M8400, M8400RV, M8400Rve, M8400S, M8450, M8480S, M84Pro(2), M84Pro(3), M84Pro(6), MR4206, M8485S, M8485Se, M8490, M8490S, M8490Se, MI-4208, MI-4308, S84 Series, S8408, S8412, S8424, XL400, XL410
And Many More! Questions? Your Printer not Listed? Call 1-800-434-9011
