Country of Origin: Made in USA.
Cost: $10.15 per roll. 36 Rolls to a case.
For Toshiba Tec Near Edge Printers
Printhead: Protective Backcoating & Anti-static.
LabelStock (a.k.a Substrate):
Gloss paper, Coated Paper, Uncoated Paper, Uncoated tag, Coated tag, Polyethylene, Polyolefin, Kimdura®, Polyart®, Valeron®, Tyvek®, Tyvek Brillion®
These Premium Near Edge Wax Resin ribbons are coated side Out (a.k.a ink on the outside). Inner diameter (core size) of this ribbon is 1” (25.4mm).These ribbons can reach print speeds of up to 6 IPS (inches per second) and have an ink transfer temperature of 74°C (166°F).
We are so Confident in This Ribbon Formula, We will Provide a Free Ribbon Sample Test Your Substrate (Label) and Printer. Remove all Doubts. Call Us at: 1-800-434-9011.
Our Premium Near Edge Wax Resin ribbonis a replacement for the following Part Numbers: 18100231
- Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.
- The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the outer side of the ribbon. The shiny side is on the inside and duller side faces out.
- Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
- Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
- Our Premium Near Edge Wax Resin ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
- Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
- Our Premium Near Edge Wax Resin ribbons are Halogen Free.
- Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.
Our Premium Wax Resin Near Edge Formulation is a replacement for the following Names: AG2, AG5, FG2, RG2, SG2, TR4500, APR 700, HA1, Net Premium, B112, M99, B120E, B130ED, US770, Z211
Toshiba Tec: B-372, B-470, B-472, B-482, B-572, B-SX4, B-SX4T Series, B-SX5, B-SX5T Series
