Country of Origin: Made in USA.
Cost: $37.02 per roll. 24 Rolls to a case.
Industry Best: Bolder Brighter Silver
Substrates:
Polypropylene, Nylon, Polyethylene, Polyolefin & Polyester
These Near Edge, High Speed, Wax Resin ribbons are coated side in (C.S.I.) / ink on the inside. Inner diameter (core size) of this ribbon is 1” (25.4mm). These ribbons are designed for high speed print up to 26 IPS (inches per second) and with an extreme darkness needed for printing on flexible packages. These ribbons are among the darkest print, near edge ribbons in the industry.
What makes it high density? The quick release primer layer combined with the high concentration of resin in the ink layer creates a dense, highly refractive bar code. Translation: The denser your barcode, the more light is reflected (refracted) back to the scanner, the fewer rescans will be required of your product. Test our ribbon with a free sample. See why our High-Density ribbon produces an industry best, bolder brighter image.
We are so Confident in This Ribbon Formula, We will Provide a Free Ribbon Sample. Test Your Substrate and Printer. Remove all Doubts. Call Us at: 1-800-434-9011
Part Number Compatibility: 18107636
Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.
- The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the inner side of the ribbon. The shiny side is on the outside and duller side faces in.
- Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
- Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
- Our Near Edge, Silver, Wax Resin ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
- Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
- Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.
Formula Compatibility: DNP: M295C Silver Specialty Near Edge Wax/Resin, M295 Silver, IIMAK: NET Color Metallic Silver Near Edge Wax/Resin, Markem-Imaje: 7810MW Xtra Wax/Resin & 7811 Wax/Resin.
Printer Models Certified for This Wax Resin Ribbon:
Markem: SmartDate 5, SmartDate 5 Coder, Smartdate X40, Smartdate X60 & Smartdate X60 128
Eidos: Swing 5.i, Printess 5 & Printess 6
Questions? Your Printer not Listed? Call 1-800-434-9011
