Wax Ribbon: 3.50" x 1,345' (89.0mm x 410m), Ink on Inside, General Use, $4.80 a Roll in 24 Roll Case

Ganson
$115.27
Current Stock:
SKU:
12S000160
Phone:
1 (800) 434-9011
Condition:
New
Availability:
in stock

Country of Origin: Made in USA. 
Cost: $4.80 per roll. 24 Rolls to a case. 
Printhead: Protective Backcoating & Anti-static.

LabelStock (a.k.a Substrate):
Coated Paper, Coated Tag, Uncoated Paper & Uncoated Tag 

These General Use wax ribbons are coated side in (a.k.a ink on the inside). Inner diameter (core size) of this ribbon is 1” (25.4mm). These ribbons can reach print speeds of up to 12 IPS (inches per second) and have an ink transfer temperature of 67°C (152°F).

We are so Confident in This Ribbon Formula, We will Provide a . Test Your Label Stock and Printer. Remove all Doubts. Call Us at: 1-800-434-9011

Our General Use Wax Ribbon is also known by the following Part Numbers: 18106948, 12S000160, SAT110-089410 & FST089F1

  • Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.
  • The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the inner side of the ribbon. The shiny side is on the outside and duller side faces in.
  • Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
  • Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
  • Our General Use Wax ribbon is approved by the following Agencies: FDA (indirect Food Contact), REACH & RoHS
  • Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
  • Our General Use Wax ribbons are Halogen Free.
  • Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity

Our General Use Wax Formulation is also known by the following Names: MP Wax, T101A, AWR 1, AWR 6, AWR 8, S2 Stellar, S2B, Fast Wax, SW150, SW200, TDW101, TDW121, UN110, UN250, E608, Z107

If you do not see your printer model on the list below we still have a ribbon for you. Free Ribbon Sample so we can match you with the correct ribbon 1-800-434-9011. These General Use Wax Ribbons Work in the following Printer Models:

Sato: CL408, CL408e, CL412e, CL608e, CL612e, GL408e, GL412e, GL608e, GL612e GT408e, GT412e, GT424e, LM408e, LM412e, LT408, M2312, M2322, M2700, M3200, M3400, M4011, M4500, M4505, M4525, M4526, M4600, M4628, M4636, M4638, M4648, M4760, M4900, M4925, MM5500, M7740, M8400, M8400RV, M8400RVe, M8400S, M8450, M8480S, M84Pro, MR4206, M10e, M84, XL410, XL410e