Country of Origin: Made in USA.
Cost: $5.21 per roll. 24 Rolls to a case.
Printhead: Protective Backcoating & Anti-static.
LabelStock (a.k.a Substrate):
Coated Paper, Coated Tag, Uncoated Paper & Uncoated Tag
These General Purpose wax ribbons are coated side in (a.k.a ink on the inside). Inner diameter (core size) of this ribbon is 1” (25.4mm) and outer diameter is 4” (101.6). These ribbons can reach print speeds of up to 12 IPS (inches per second) and has an ink transfer temperature of 67°C (152°F).
We are so Confident in This Ribbon Formula, We will Provide a Free Ribbon Sample. Test Your Label Stock and Printer. Remove all Doubts. Call Us at: 1-800-434-9011
Our Standard Wax Ribbon is also known by the following Part Numbers: 18106958, 222113, B220110CIS, T44086ZA, T44169ZA, T44947ZA, FFS110F1, FAR110-107360, FAR110-110360 & FAR110-114360
- Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.
- The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the inner side of the ribbon. The shiny side is on the outside and the ink side faces in.
- Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
- Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
- Our General-Purpose Wax ribbon is approved by the following Agencies: FDA (indirect Food Contact), REACH & RoHS
- Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
- Our General-Purpose Wax ribbons are Halogen Free.
- Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity
Our General-Purpose Wax Formulation is also known by the following Names: MP Wax, TMX1200, TMX1500, GPR+, IQ Wax, AWR 1, AWR 6, AWR 8, S2 Stellar, S2B, Fast Wax, High Mark, SW150, SW200, TDW101, UN110, UN250, E608, Z107
If you do not see your printer model on the list below we still have a ribbon for you. Free Ribbon SampleFree Ribbon Sample so we can match you with the correct ribbon 1-800-434-9011. These General-Purpose Wax Ribbons Work in the following Printer Models:
CAB: A8+, Mach 4
Citizen: CLP-4121, T4, CLP-7201e, CLP-7102e
Datamax: Allegro, Allegro XL, Allegro 2, Ovation, Ovation 2, Prodigy Max, DMX 400, DMX 430, DMX 600, DMX 800, Titan, M-Class, M-Class Mark II, MarkII 4206, M-4206, M-4210, M-4308, I-4208, I-4308, I-4212, I-4406, I-4604, H-4212, H-4310, H-4408, H-4606, H-4212x, H-4310x, H-4606x, H-6210, H-6308, H-6212x, H-6310x, H-8308x, A-4212, A-4310, A-4408, A-4606, A-6212, A-6310, W-6208, W-6308, W-8306
Sato: CL 408e, Cl 412e, CL 608e, CL 612e, GL 408e, GL 412e, GL 608e, GL 612e GTe 408e, GTe 412e, GTe 424e, LM408e, LM412e, M10e, M84, S8408, S8412, S8424LM408e, LM412e, M10e, M84, M84Pro, S8408, S8412, S8424
And Many More!
