Wax Ribbon: 4.33" x 298’ (110.0mm x 91m), Ink on Outside, General Use, Half Inch Core, $2.42 per Roll in 36 Roll Case

Ganson
$87.00
Current Stock:
SKU:
17174813
Phone:
1 (800) 434-9011
Condition:
New
Availability:
In stock

Country of Origin: Made in USA. 
Cost: $2.42 per roll. 36 Rolls to a case. 
Printhead: Protective Backcoating & Anti-static.

LabelStock (a.k.a Substrate):
Coated Paper, Coated Tag, Uncoated Paper & Uncoated Tag 

These General Use Wax ribbons are coated side out (a.k.a ink on the outside). Inner diameter (core size) of this ribbon is 1/2” (12.7mm). These ribbons can reach print speeds of up to 12 IPS (inches per second) and have an ink transfer temperature of 67°C (152°F).

We are so Confident in This Ribbon Formula, We will Provide a . Test Your Label Stock and Printer. Remove all Doubts. Call Us at: 1-800-434-9011  

Part Number Compatibility: 17174813, T16592ZA, T14691ZA, 17174813-12, C-LA110091, FED110FW, FED11025X, FED11025XC, FAR110HM, FED110HM, Z110091101W, ARG110-110091, E22110-110091, ARG260-110091 & E22260-110091

Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.

  • The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the outer side of the ribbon. The shiny side is in and duller side faces out.
  • Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
  • Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
  • Our General Use Wax ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
  • Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
  • Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.

Formula Compatibility: MP Wax, Zebra 2000, Zebra 6000, AWR 1, AWR 6, AWR 8, S2 Stellar, S2B, Fast Wax, SW150, SW200, TDW101, TDW121, UN110, UN250, E608, Z107, AWR 470, AWX 500, Half Inch Wax, W137, GP725, UN260

If You do not See Your Printer Model Call Us. We can Match You with the Correct Ribbon 1-800-434-9011. 

Printer Models Certified for This Resin Ribbon:

Zebra: T402, TLP 2242, TLP 2642, TLP 2742, TLP 3742, TLP 2844, TLP 2844-Z, TLP 3642, TLP 3842, TLP 3844-Z, R2844-Z, R402
Brady: MiniMark, TLP2242, TLP2642, TLP3642
Citizen: C.Itoh EZ-4T
Intermec: 7421, 7422, C4, EasyCoder 91, EasyCoder PC4, PC41, PC42, PC43t, PF8t

And Many More! Questions? Your Printer not Listed? Call 1-800-434-9011