3" x 1", Thermal Transfer, Perforated, Roll, 3" Core, Polyester Gloss, $90.33 per Roll in 1 Roll Case.

Ganson
$90.33
Current Stock:
SKU:
10011691
Phone:
1 (800) 434-9011
Condition:
New
Availability:
in stock

Country of Origin: Made in USA. 
Cost: $18.07 per 1,000 labels, 5,000 labels a roll, $84.00 per Roll, 1 roll in a case. 5,000 labels to a case. 
Designed for: Abrasion Resistance, Scannability and Label Life when used with a Ribbon.

These labels are waterproof, UV resistant and UL Certified. This durable label can survive outdoor weather conditions. They are resistant to smudging, scratching, heat and chemicals. These Labels are UL approved to remain affixed to UL end-products. These labels are Polyester Thermal Transfer labels that Require a ribbon. The label’s surface is Bright White with a Glossy appearance. The Adhesive is standard Permanent Adhesive. 

This label can be applied at temperatures from a low of 32°F to a high of 100°F. Our Coated Polyester Label will maintain its adhesion strength in temperatures ranging from -4°F to 176°F.

Inner diameter (core size) of the label’s roll is 3” (76.2mm). There are perforations between each label. The labels are separated by 1/8" gap between labels. This label’s shape is rectangle and the corners are rounded. Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label).

This Label is compatible with the following Part Numbers: IDIM10131P1P37S, 10011691, 10011702, 10011709, 10014014 & ETP3010AP

We are so Confident in This Label, We will Provide a . Test Your Ribbon and Printer against this Label. Remove all Doubts. Call Us at: 1-800-434-9011.

  • Uses: Warnings, Cautions, Electrical Ratings, Installation Information Labels.
  • Industries: Healthcare, Electronic, Outdoors, Manufacturing, Retail & Transportation
  • Our labels are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
  • To extend the life of the label face we use a 46 lb face stock
  • To insure read and scanning quality the face stock has an 89% brightness and an 87% opacity
  • We use a face stock with a tensile strength of 26 lbf/in to resist abrasions.
  • We have labels that are UL-certified, GHS compliant.
  • Custom labels can be produced on a wide variety of material, with custom colors, sizes and shapes.
  • If you have questions or are looking for custom labels call us toll free at: 1-800-434-9011.