Newland AIDC > Newland NVH300 and NVH300B Barcode Scanners
Newland NVH300 and NVH300B Barcode Scanners - Industrial DPM Scanning, Corded or Bluetooth
The Newland NVH300 series is a handheld industrial DPM barcode scanner built to read laser-etched and dot-peened direct part marks on reflective, curved, and low-contrast surfaces. Available as the corded NVH300 or the Bluetooth NVH300B, the series is built for production floors where parts are marked directly and every read has to land the first time.
Built for Direct Part Marks
Both models run Newland's UIMG® decoding engine on a 1280 x 960 CMOS image sensor, lifting success rates on complex and DPM barcodes. White direct illumination paired with a ring of red and blue diffuse LEDs handles different materials, reflective finishes, curved surfaces, and varied backgrounds and barcode colors, while a 650 nm laser diode keeps aiming precise. On the NVH300, AI-powered barcode positioning improves low-contrast reads and intelligent learning adjusts parameters automatically for different scanning scenarios.
Precise capture for close-range DPM work:
- Reads 2D symbologies including Data Matrix, QR Code, Micro QR, and PDF417, plus common 1D codes such as Code 128, Code 39, UPC/EAN, and Interleaved 2 of 5
- Resolves 2D codes down to 3 mil on both models, and 1D codes down to 1.67 mil on the NVH300
- Reads 10 mil Data Matrix from 0 to 130 mm on the NVH300 and 0 to 90 mm on the NVH300B
- 41 x 31 degree field of view with full 360 degree roll, up to 60 degrees of pitch, and up to 55 degrees of skew
Corded or Wireless Connectivity
The NVH300 connects over USB, RS-232, or Ethernet and ships with a 2 m straight rugged USB cable. The NVH300B uses Bluetooth 5.0 BLE with a range of up to 150 m (492 ft) line of sight, and its 900 KB flash memory stores scans taken beyond range so no data is lost. It connects to the host over USB, RS-232, or Ethernet.
All-Shift Battery
The NVH300B carries a 3200 mAh battery rated for 23+ hours of continuous operation and up to 36,000 scans per charge, with a 4-hour charge time.
Built to Stay in Service
The corded NVH300 is IP64 sealed and rated for repeated 2.4 m drops. The NVH300B is IP54 sealed and rated for 1.8 m drops. Both operate from -20°C to 50°C (-4°F to 122°F) with ESD protection of 16 kV air and 8 kV direct, and both the NVH300 and NVH300B carry a 3-year standard warranty.
Key Features and Benefits:
- DPM decoding for laser-etched and dot-peened marks
- UIMG® decoding engine on a 1280 x 960 CMOS sensor
- White direct and red/blue diffuse ring illumination for reflective, curved, and low-contrast surfaces
- AI barcode positioning and intelligent learning on the NVH300
- 650 nm laser diode aiming for precise targeting
- NVH300 corded: USB, RS-232, and Ethernet with a 2 m rugged USB cable included
- NVH300B wireless: Bluetooth 5.0 BLE with up to 150 m line-of-sight range and 900 KB scan buffering
- 3200 mAh battery on the NVH300B with 23+ hours of continuous operation
- IP64 sealed with 2.4 m drop rating on the NVH300, IP54 with 1.8 m on the NVH300B
- Beep, LED, and vibration feedback to confirm every read
- Optional RS-232 cable and foldable stand for both models, plus a wall-mount bracket and power adapter for the NVH300
- 3-year standard warranty on both models
