Wax Resin Ribbon: 2.16” x 2,460’ (55.0mm x 750m), Ink on Outside, Bright White, Near Edge, $25.56 per Roll in 24 Roll Case

Ganson
$613.44
Current Stock:
SKU:
18105642
Phone:
1 (800) 434-9011
Condition:
New
Availability:
In stock

Country of Origin: Made in USA. 
Cost: $25.56 per roll. 24 Rolls to a case. 
Industry Best: Bolder Brighter White

Substrates:
Polypropylene, Nylon, Polyethylene, Polyolefin & Polyester

These Near Edge, High Speed, Wax Resin ribbons are coated side out (C.S.O.) / ink on the outside. Inner diameter (core size) of this ribbon is 1” (25.4mm). These ribbons are designed for both high speed print (up to 26 inches per second) and extreme brightness needed for printing white on flexible substrates. These ribbons are among the brightest print in the near edge ribbons in the industry.

What makes it high density? The quick release primer layer combined with the high concentration of resin in the ink layer creates a dense, highly refractive bar code. Translation: The more light your barcode can reflect (refract) back to the scanner, the fewer rescans will be required of your product. Test our ribbon with a free sample. See why our High-Density ribbon produces an industry best, bolder brighter white.

We are so Confident in This Ribbon Formula, We will Provide a . Test Your Substrate and Printer. Remove all Doubts. Call Us at: 1-800-434-9011  

Part Number Compatibility: 18105642, FVJ055KW, 15-S55WQ10, 15-P55MWQ10 & 15-P55WQ10

Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier (backing of label). If you go too wide on the ribbon, you run the risk of causing the ribbon to wrinkle. If you go to narrow you will experience a reduced lifespan of the printhead.

  • The duller side of the ribbon is the ink coated side. This ribbon’s ink is on the outside of the ribbon. The shiny side is in and duller side faces out.
  • Our ribbon’s backcoating is formulated for printhead protection. The backcoating creates a protective barrier that results in significantly less build-up on your printhead’s heating element.
  • Our ribbon’s ink formulation dissipates static, preventing static build-up and reducing the threat of printing voids or the potential for a spark burning out a printhead.
  • Our Near Edge, Bright White Wax Resin ribbon is approved by the following Agencies: FDA (indirect food contact), UL, REACH & RoHS
  • Our ribbons are ISO 9001 Quality Management and ISO 14001 Environmental Management certified
  • Our ribbon’s recommended shelf life is one year. Avoid high humidity and direct sunlight during storage. Storage temperature should be 41°F to 95°F (5°C to 35°C) at 20% to 85% Relative humidity.

Formula Compatibility: DNP: M295C Bright White Specialty Near Edge Wax/Resin, M295 White, Iimak: NET Color White Near Edge Wax/Resin, DC200 White Wax/Resin, Markem-Imaje: 3410 Xceed Wax/Resin, Armour: APR 600W White Premium Near Edge Wax/Resin, APR 650MW Metallic White (877C) Premium Near Edge Wax/Resin, APR 700 Metallic White Premium Near Edge Wax/Resin, APR 700 White Premium Near Edge Wax/Resin, Dynic: HT8PLUS White Near Edge Wax/Resin, ITW Thermal Films: P110W High Speed Techno-Edge White Near Edge Wax/Resin, Videojet Technologies: Standard, Super Standard

Printer Models Certified for This Wax Resin Ribbon:

Videojet:  6210, 6230, 9550, DataFlex 6320, DataFlex 6330, Dataflex 6420, DataFlex 6530, DataFlex Plus

Questions? Your Printer not Listed? Call 1-800-434-9011